Damp and Replastering Products

Shop

New - One Shot Injection Skeleton Guns

 

 

 

 

Ring us with your order or for FREE Damp Technical Help - 01626 331351

Click to return to Home Index Page

   

Replastering Additive - Replastering & Finishing Kit -

Replastering Paint - Plaster Damp Seal Spray - Plaster Stain Seal Paint

Plaster Salt Neutraliser - Wall Plaster Membranes

 

Damp Proofing Creams - Small Tubes - Medium Sized Tubes -Trade Tubs & Pump -

Complete DIY Damp Proofing Kits - One Shot Skeleton Guns

- Brush On Membranes - Damp Meters -

      

 

Masonry Drill Bits - Wall Plugs -

Water Repellent - Tanking

BondAcryl

- SPECIAL OFFERS SHOP (including all our Kits)

- Dampness Book - Trade Bulk Offers


     LOW COST PROMPT DELIVERY

Only - £7.75, for 2-3 day, £10.97 for 1-2 day, plus VAT.

This rate applies for the first 10kgs per Order. Note - all prices are shown ex VAT.

 


   
 

Ultracure DIY Professional Injection Cream - 380cc.

BBA Certificate No:02/3961.

 
    
 

Buy One or More Tubes of Ultracure DPC - including extension tube only - 380cc.

Enough for up to 3.8 metres (12 feet) of 4.5 inch single thickness wall - £14.25 plus VAT -

(See Offers and Special Offers and Accessories below, in the next section)


Option - Unique One Shot option - measured shot Skeleton Guns now available

One trigger pull = one hole full, for a 4.5 inch wall.

Two trigger pulls = one hole full, for a 9 inch thick wall.

To buy a One Shot Skeleton Gun - click here

Our Special Features: No pumping pressure required, only one Quick dose per hole needed, correct Extended Nozzle supplied, Calibrated Skeleton Gun available, 20 Year Product Guarantee for a named Property available, Professional Hole Drilling Template available, Building Society/Lender Paperwork Pack available.


Easy to use plastic cartridge. Drill a 12mm diameter hole and blow out the dust. Then simply insert the Ultracure tube into a 10 inch (250mm) long skeleton gun and screw on the extension nozzle tube adapter. Inject gently, like putting paste on your toothbrush, back filling the 12mm diameter hole, from the bottom of the hole outwards. Then plug the holes with our bang-in plastic DPC Plugs (three colours available).

Usage rate - 3.5 metres (11 feet) per 380cc of 4.5 inch, single 'leaf' wall, or 1.75 metres (5.5 feet) per 380cc of 9 inch, two 'leaf' solid or cavity wall.

Frequently purchased with this product - Spare Extended Nozzles, Calibrated Professional Skeleton Gun, Professional Drilling Template, Standard Professional Skeleton Gun, 12mm Masonry Bit, Puffer to Blow Out Holes, Injection Hole Plugs, Replastering Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit, Product Guarantee Certificate for a Property.

Buy Discounted Kits for Injection & Replastering - Complete DIY Damp Proofing Kits - to BUY click DIY DPC KIts

Injection & Replastering - Replastering Additive to go with your DPC Cream purchase - click Replastering Additive


Injecting a wall

Dave injecting a wall with Ultracure Cream

 

One Shot Damp Proofing

Ultracure 380cc Cartridge.

(Shown fitted with an Extended Nozzle)

 

One Shot DPC Cream with Skeleton Gun

With Professional Skeleton Gun

(now available with Calibration Markings)

 
 

Don't be fooled by:

1. The DPC Cream alone will not do the job on its own - but unlike our competitors we offer ALL the Professional Tools for the job, plus FREE diagnosis and FREE Project Mentoring with our Experts.

2. Most dampness problems are NOT simple Rising Damp. Why waste money on products that you don't need? Ask our advice for FREE or buy our Diagnosis Book, written by top Expert, Graham Coleman.

3. Some Competitors don't offer the simple Tools to do the job properly - Extension Nozzle Tube, Drilling Template, DPC Plugs, Calibrated Skeleton Gun.

4. Some Competitors don't offer the Building Society/Lender Paperwork Pack - when you come to sell your Property you will need this paperwork.


 

BBA Certificate - why it matters.

The British Board of Agrement tests building products. It is a UK Government backed organisation, so tested products are Certificated as reliable and genuine.

Building Society/Lender Paperwork Pack

When you come to sell your house the Purchaser will want to know what damp proofing work you have carried out. Our unique Pack, in a labelled envelope, is ready for you to store ready for that day.

 

 
 

 

Offers: Choose how you want to Buy Ultracure DPC Cream 380cc.

A. Buy One or More Tubes of Ultracure DPC - including extension tube only - 380cc.

Enough for up to 3.8 metres (12 feet) of 4.5 inch single thickness wall - £14.25 plus VAT -

(you can buy Accessories individually from the list below, in the next section)


B. Buy One Tube of Ultracure - including one basic Accessories Pack - 380cc.

Enough for up to 3.8 metres (12 feet) of 4.5 inch single thickness wall - £22.50 plus VAT -

(includes Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy)


C. Buy 4 Tubes of Ultracure - including one basic Accessories Pack - 380cc.

Enough for up to 15.2 metres (50 feet) of 4.5 inch single thickness wall - £57.00 plus VAT -

(includes Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy).


If you need more than 4 Tubes, or you are going to carry out other jobs in the future, it will be cheaper for you to switch to the 1 Litre, or 3 Litre Packs, shown below.

Click here for Special Offers

Click here to look at 1 Litre costs

Click here to look at 3 Litre costs


One Shot Skeleton Gun - why it matters.

Most suppliers do not offer a measured dose system.

Without this tool you cannot exactly dose each hole - you will waste some product in some holes and under fill other holes..

Extended Injection Nozzle - why it matters.

Most suppliers do not offer a proper, extended nozzle.

Without this extended version you cannot start the injection of cream from the very bottom of the hole. Unless you start from the hole base you will trap air in the cream and the Damp Proof Course will be incomplete.

 

Our Unique Professional Drilling Template

The easy way to correctly inject a Damp Proof Course with DPC Cream. This Copyright printed cardboard device shows you the hole spacing, hole depth and the height of the holes above the ground, plus the Injection Method Checklist and Replastering Checklist, all on one compact Template.

An essential guide to hole height and spacing, includes replastering check list.

 

Drilling a Mortar Joint

Drilling a joint - 12mm diameter Masonry bit

 
 

Buy Professional Accessories separately:

1. Basic Accessories Pack - Extra Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy) - £9.99 plus VAT -

2. One Shot Calibrated Professional Skeleton Gun - 380cc - £19.88 plus VAT -

3. Normal Professional Skeleton Gun - 380cc - £16.50 plus VAT -

4. Professional Drilling Template - £3.25 plus VAT -

5. Spare 380cc Extended Nozzle Tubes - £4.85 plus VAT -

Extended nozzle for up to 9 inch (225mm) thick walls. You can request extra length for thicker walls by calling us on 01626 331351.

6. Masonry Drill Bits - £11.98 plus VAT -

Masonry Bit (SDS) for 12mm x 310mm. You can request extra length for thicker walls by calling us.

7. Puffer pump to blow out holes - small hand pump with extension tube - £4.99 plus VAT -

8. Special Injection Hole Plugs - 13mm tapered - 3 colours - bags of 25 - £3.96 plus VAT.

Bag of 25, Dark Brown -

Bag of 25 Plugs, Limestone Buff -

Bag of 25 Plugs, Brick Red -

9. Property Specific 20 Year Product Guarantee Certificate - £20.00 plus VAT per job -

10. Building Society/Lender Paperwork Pack - Supplied in a labelled plastic envelope for storage with your house Files/Deeds - Extra Copy Invoice, 20 Year Product Guarantee Certificate (for an individual property), BBA Certificate (Colour Copy) - £29.98 plus VAT-

11. Dampness in Buildings - Coleman - a reprint, to guide you in diagnosing dampness:

Printed Version - £9.99 plus VAT -

or, buy the Download Version - £5.99 plus VAT -

 

 

One Shot Calibrated Skeleton Gun - how it works.

The trigger that pushes the piston has been specially altered, so that one complete pull of the trigger squeezes out the amount required per hole, per single leaf 4.5 inch (115mm) of wall thickness. You require one trigger pull per 4.5 inch of wall thickness, two pulls for 9 inch wall thickness and so on, allowing you to accurately dose each hole, with no waste.

 

Certificates - why they matter.

Anyone buying a house will want to know which product has been used and see its 20 year Guarantee Certificate. You can select the extra Certificate, which is printed on 'card' and is individual to your property.

 

Masonry Bits

A good quality, sharp bit is essential in order to drill a clean, 12mm diameter hole. Always blow or vacuum the dust out of the hole before injection. Make sure that your drilling machine chuck and bearings are in good condition, otherwise you will produce a ragged, oval hole and the DPC Plugs will be a sloppy fit.

 

DPC Hole Plastic Plugs

It is important to fill the holes, either with these plastic plugs, or with sand and cement mix incorporating our Renderproof Additive. If outside holes are left open rainwater main enter. If inside holes are left open the cream may migrate into the render or plaster, if it has not be cut back exactly above the injection holes. This will waterproof the plaster or render, making it hard to paint and leaving a visible mark.

 

Dampness in Buildings - book

A superb condensed guide which helps you to identify and diagnose all the different types of dampness and their symptoms. Worth its weight in gold - handy, pocket sized. Buy a reprint or Download a copy to your computer. This book could save you a fortune in treatments that you don't need.

 

QUESTIONS ? - RING 01626 331351

 
   


 
 

Skeleton Guns - 400cc and 1000cc (1 litre) Professional Quality

New - unique One Shot Calibrated Versions available - for exact injection.

  
 

 

400cc Skeleton Gun - for injection using all our cartridge tube products when supplied in single tubes, 280cc to 400cc. This skeleton gun may look the same as your familiar mastic frame gun, but there are two lengths in common use. The shorter frame takes only the 310cc cartridge size, whilst the longer frame version (about 10 inches - 250mm in the tube space) will carry up to 400cc tubes. For our Ultracure Cream you need the longer one, as shown here.

400cc Calibrated Skeleton Gun - the trigger that pushes the piston has been specially altered, so that one complete pull of the trigger squeezes out the amount required per hole, per single leaf 4.5 inch (115mm) of wall thickness. You require one trigger pull per 4.5 inch of wall thickness, two pulls for 9 inch wall thickness and so on, allowing you to accurately dose each hole, with no waste.

Neither of these skeleton guns are large enough to take the 1000cc tubes (see next paragraph).

1000cc Skeleton Gun - a special 1 Litre gun for injection when using our 1000cc Ultracure Cream, or our other 1 Litre products.

1000cc Calibrated Skeleton Gun - the trigger that pushes the piston has been specially altered, so that one complete pull of the trigger squeezes out the amount required per hole, per single leaf 4.5 inch (115mm) of wall thickness. You require one trigger pull per 4.5 inch of wall thickness, two pulls for 9 inch wall thickness and so on, allowing you to accurately dose each hole, with no waste.


One Shot Skeleton Gun for DPC Injection Cream

400cc Professional Skeleton Gun

(Will take 210/280cc/310/380cc tubes)

One Shot, Calibrated option available.

 

Extended DPC Injection Tube Nozzle

400cc cartridge extended nozzle

 
 

Professional 400cc Skeleton Gun - £16.50. Calibrated 400cc Version - £19.88 plus VAT.

Professional 1000cc Skeleton Gun - £26.98. Calibrated 1000cc Version - £30.36 plus VAT.

Buy 400cc gun - - Buy 400cc Calibrated gun -

Buy 1000cc gun - - Buy 1000cc Calibrated gun -

 

Extended Nozzles: 380/400cc - £4.85, or 1000cc - £6.25 or Brass 1000cc - £24.80 plus VAT.

Buy Plastic Extended 380cc/400cc Nozzle - for up to 225mm wall -

Buy Plastic Extended 1000cc Nozzle - for up to 225mm wall -

 

Buy Brass Heavy Duty Extended 1000cc Nozzle - for up to 225mm wall -

 

or, give us a call on 01626 331351 to requested longer extension nozzles to suit your walls.

 

 

One Litre Skeleton Gun

1000cc Professional Skeleton Gun

Calibrated option available.

Extended injection tube nozzle for 1 litre DPC Cream injection

1000cc cartridge extended nozzle

 


 
 

Ultracure DIY Professional Injection Cream - 1000cc - 1 litre.

BBA Certificate No:02/3961.

Click for Help Page

High Tech Cream in a cartridge

 
 

Buy One or More Tubes of Ultracure - including extension tube only - 1000c - £24.50 plus VAT.

Enough for 9 metres (30 feet) of 4.5 inch single thickness wall -

(See Offers and Special Offers and Accessories below, in the next section)


Option - Unique One Shot - measured shot Skeleton Guns

One trigger pull = one hole full, for a 4.5 inch wall.

Two trigger pulls = one hole full, for a 9 inch thick wall.

To buy a One Shot Skeleton Gun - click here

Our Special Features: No pumping pressure required, only one Quick dose per hole needed, correct Extended Nozzle supplied, Calibrated Skeleton Gun available, 20 Year Product Guarantee for a named Property available, Professional Hole Drilling Template available, Building Society/Lender Paperwork Pack available.


Larger plastic cartridge for bigger Projects. Drill a 12mm diameter hole and blow out the dust. Then simply insert the Ultracure tube into a Special 1 litre skeleton gun and screw on the extension nozzle tube adapter. Inject gently, like putting paste on your toothbrush, back filling the 12mm diameter hole, from the bottom of the hole outwards. Then plug the holes with our bang-in plastic DPC Plugs (three colours available).

Usage rate - 9.0 metres (30 feet) per 1000cc tube of 4.5 inch, single leaf wall, or 4.5 metres (15 feet) per 1000cc tube of 9 inch, two leaf solid or cavity wall.

Frequently purchased with this product - Spare Extended Nozzles, Calibrated Professional Skeleton Gun, Professional Drilling Template, Standard Professional Skeleton Gun, 12mm Masonry Bit, Puffer to Blow Out Holes, Injection Hole Plugs, Replastering Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit, Product Guarantee Certificate for a Property.

Buy Discounted Kits for Injection & Replastering - Complete DIY Damp Proofing Kits - to BUY click DIY DPC KIts

Injection & Replastering - Replastering Additive to go with your DPC Cream purchase - click Replastering Additive


Don't be fooled by:

1. The DPC Cream alone will not do the job on its own - but unlike our competitors we offer ALL the Professional Tools for the job, plus FREE diagnosis and FREE Project Mentoring with our Experts.

2. Most dampness problems are NOT simple Rising Damp. Why waste money on products that you don't need? Ask our advice for FREE or buy our Diagnosis Book, written by top Expert, Graham Coleman.

3. Some Competitors don't offer the simple Tools to do the job properly - Extension Tube, Drilling Template, DPC Plugs, Calibrated Skeleton Gun.

4. Some Competitors don't offer the Building Society/Lender Paperwork Pack - when you come to sell your Property you will need this paperwork.


Offers - Choose how you want to Buy Ultracure Cream 1000cc - 1 litre.

A. Buy One or More Tubes of Ultracure - including extension tube only - 1000c - £24.50 plus VAT.

Enough for 9 metres (30 feet) of 4.5 inch single thickness wall -


B. Buy One Tube of Ultracure - including one basic Accessories Pack - 1000cc - £32.86 plus VAT.

Enough for 9 metres (30 feet) of 4.5 inch single thickness wall -

(includes Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy)


C. Buy 4 Tubes of Ultracure - including one basic Accessories Pack - 1000cc - £98.00 plus VAT.

(includes Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee

Certificate (generic), BBA Certificate (photocopy) -


If you need more than 8 Tubes, or you are going to carry out other jobs in the future, it will be cheaper for you to switch to the 3 Litre Packs, shown below.

Click here for Special Offers

Click here to look at 3 Litre costs


Buy Professional Accessories separately:

1. Basic Accessories Pack for 1 litre tubes - Extension Injection Tube for 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy) - £9.99 plus VAT -

2. One Shot Calibrated Professional Skeleton Gun - 1000cc - £30.36 plus VAT -

3. Professional Skeleton Gun - 1000cc - £26.98 plus VAT -

4. Professional Drilling Template - £3.25 plus VAT -

5. Spare Plastic 1000cc Extended Nozzle Tubes - £4.95 plus VAT -

Extended plastic nozzle for up to 9 inch (225mm) thick walls. You can request extra length by calling us.

6. Professional Metal Extended 1 Litre Nozzle Tube - £18.60 plus VAT -

For long term heavy duty use, al brass construction.

7. Masonry Drill Bits - £11.98 plus VAT -

Masonry Drill Bit (SDS) 12mm x 310mm. You can request extra length for thicker walls by calling us.

8. Puffer pump to blow out holes - small hand pump with extension tube - £4.99 plus VAT -

9. Special Injection Hole Plugs - 13mm tapered - 3 colours - bags of 25 - £3.96

Bag of 25, Dark Brown -

Bag of 25 Plugs, Limestone Buff -

Bag of 25 Plugs, Brick Red -

10. Property Specific 20 Year Product Guarantee Certificate - £20.00 plus VAT per job -

11. Building Society/Lender Paperwork Pack - Supplied in a labelled envelope for storage with your house Files/Deeds - Extra Copy Invoice, 20 Year Product Guarantee Certificate (for an individual property), BBA Certificate (Colour Copy) - £29.98 plus VAT -

12. Dampness in Buildings - Coleman - a reprint, to guide you in diagnosing dampness:

Printed Version - £9.99 plus VAT -

or, buy the Download Version - £5.99 plus VAT -

One Shot Calibrated Skeleton Gun - how it works.

The trigger that pushes the piston has been specially altered, so that one complete pull of the trigger squeezes out the amount required per hole, per single leaf 4.5 inch (115mm) of wall thickness. The instructions then specify how many pulls of the trigger will be required, allowing you to accurately dose each hole, with no waste.

1 Litre One Shot DPC Cream

Quick Cream Ultracure 1000cc Cartridge.

(Shown fitted with an Extended Nozzle)

One Litre DPC Cream with a One Shot Skeleton Gun

With Professional Skeleton Gun

(now available with Calibration Markings)

BBA Certificate - why it matters.

The British Board of Agrement tests building products. It is a UK Government backed organisation, so tested products are Certificated as reliable and genuine.

Building Society/Lender Paperwork Pack

When you come to sell your house the Purchaser will want to know what damp proofing work you have carried out. Our unique Pack, in a labelled envelope, is ready for you to store ready for that day.

 

Extended Injection Nozzle - why it matters.

Most suppliers do not offer a proper, extended nozzle.

Without this extended version you cannot start the injection of cream from the very bottom of the hole. Unless you start from the hole base you will trap air in the cream and the Damp Proof Course will be incomplete.

 

Our Unique Professional Drilling Template

The easy way to correctly inject a Damp Proof Course with DPC Cream. This Copyright printed cardboard device shows you the hole spacing, hole depth and the height of the holes above the ground, plus the Injection Method Checklist and Replastering Checklist, all on one compact Template.

An essential guide to hole height and spacing, includes replastering check list.

 

One Shot Calibrated Skeleton Gun - how it works.

The trigger that pushes the piston has been specially altered, so that one complete pull of the trigger squeezes out the amount required per hole, per single leaf 4.5 inch (115mm) of wall thickness. The instructions then specify how many pulls of the trigger will be required, allowing you to accurately dose each hole, with no waste.

 

Certificates - why they matter.

Anyone buying a house will want to know which product has been used and see its 20 year Guarantee Certificate. You can select the extra Certificate, which is printed on 'card' and is individual to your property.

 

Masonry Bits

A good quality, sharp bit is essential in order to drill a clean, 12mm diameter hole. Always blow or vacuum the dust out of the hole before injection. Make sure that your drilling machine chuck and bearings are in good condition, otherwise you will produce a ragged, oval hole and the DPC Plugs will be a sloppy fit.

 

DPC Hole Plastic Plugs

It is important to fill the holes, either with these plastic plugs, or with sand and cement mix incorporating our Renderproof Additive. If outside holes are left open rainwater main enter. If inside holes are left open the cream may migrate into the render or plaster, if it has not be cut back exactly above the injection holes. This will waterproof the plaster or render, making it hard to paint and leaving a visible mark.

 

Dampness in Buildings - book

A superb condensed guide which helps you to identify and diagnose all the different types of dampness and their symptoms. Worth its weight in gold - handy, pocket sized. Buy a reprint or Download a copy to your computer. This book could save you a fortune in treatments that you don't need.

 

QUESTIONS ? - RING 01626 331351

Calibrated 1 litre skeleton gun

1 Litre Skeleton Gun with Calibration

 

400cc Version with Calibration

400cc Calibrated Skeleton Gun

 

 

 

 

 


 

 
 Tanking Slurry Powder - 25kgs - Professional with BBA Certificate - in a tough plastic pail - just add water.
DO YOU NEED JOINT FILLING AND LEAKSTOP?
 
 

For coating masonry, brick, stone, floors and walls. Simply mix with water to form a 'slurry' - a smooth, brushable thick paint, like masonry paint. Wet the surfaces first and allow to dry until just damp. Brush on one coat, with horizontal brush strokes and allow to dry. Re-damp before re-coating, if dried right out. Apply a second coat, brushing vertically. This eliminates the risk of missed patches and pinholes. Slurry can be rendered over whilst wet, or prime with another coat, or use BondaAcryl.

Usage rate - 6 - 8 square metres per 25kgs, per coat, subject to surface roughness, giving a two coat coverage per pail of 3 - 4 square metres.

Also Required when Tanking - Joint Filling Mix (for the floor to wall gap joint), Leakstop - Hydraplug, (for instant leak and weep sealing).

Usage rates - Joint Filling mix - mix with water to produce a stiff mortar, allow 1kg per 1 metre of joint approximately 25mm x 25mm (1 inch x 1 inch) at the floor to wall joint, or in cracks and voids.

Frequently purchased with this product - BondAcryl as a primer, Renderproof Render Additive, Wall Membrane Kit.


BBA HydraDry Tanking Slurry - £59.86 plus VAT per 25kg plastic pail.

Joint Filling Mix - £53.60 plus VAT per 25kgs.

Leakstop - £23.98 plus VAT per 5kgs.

Buy Tanking Slurry Powder, HydraDry - 25kgs - - in a re-sealable plastic pail

Buy Joint Filling Mix, Fillet Seal - 25kgs - - in a re-sealable plastic pail

Buy Leakstop, Hydraplug, 5kgs - - in a re-sealable plastic pail

 

Tanking Slurry is easy to apply - just add water

Brushing Tanking Slurry onto Blocks

Joint Filling Mix - Waterproof Fillet Seal

Tanking Slurry - just add water

Leakstop Instant - Hydraplug

Stop Leaks - Leak Stopping powderT

 

 
 BondAcryl - 2.5, 5 and 25 litre - ultra enhanced SBR type formula  
    
 

1. Bonds a repair mortar (sand and cement) to old concrete or render, when used as a primer.

2. Makes a sand and cement mix waterproof, when used instead of water.

3. Allows 'screeds' to be laid much thinner than normal - down from the normal 50mm minimum to 12.5mm thick.

4. Reduces shrinkage and the risk of cracking when used in sand and cement mixes.

Usage rate - see our guide in the Data Sheet - click here.

Bondacryl - no odour, primer/additive.

Bonding cement renders and patches

 
 Bondacryl 2.5 litres - £18.96, Bondacryl 5 litres - 28.94, Bondacryl 25 litres - £98.88 plus VAT.
BondAcryl, 5 litre and 2.5 litre
 
    

Buy Bondacryl 2.5 litre -

Buy Bondacryl 5 litre -

Buy Bondacryl 25 litre -



 
 

Ultracure DIY Professional Injection Cream - 3000cc - 3 litre.

BBA Certificate No:02/3961

Special Offer - when you buy 4 tubs or more you will receive a FREE 'Pump up Pot' fitted with injection rod and tap.


Our Special Features: Low pumping pressure required, only one Quick dose per hole needed, correct Extended Nozzle supplied, 20 Year Product Guarantee for a named Property available, Professional Hole Drilling Template available, Building Society/Lender Paperwork Pack available.


Supplied In a plastic bag, inside a bulk container. Simply pour from the plastic bag into the special pump-up injection pot. Drill a 12mm diameter hole and blow out the dust. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards. Then plug the holes with our bang-in plastic DPC Plugs (three colours available).

Usage rate - 27 metres (89 feet) per 3000cc of 4.5 inch, single leaf wall, 13.5 metres (44 feet) per 3000cc of 9 inch, two leaf solid or cavity wall.

Frequently purchased with this product - 5 litre Professional Pump Up Pot (illustrated), Professional Drilling Template, 12mm Masonry Bit, Puffer to Blow Out Holes, Injection Hole Plugs, Replastering Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit, Product Guarantee Certificate for a Property.

Buy Discounted Kits for Injection & Replastering - Complete DIY Damp Proofing Kits - to BUY click DIY DPC KIts

Injection & Replastering - Replastering Additive to go with your DPC Cream purchase - click Replastering Additive


Don't be fooled by:

1. The DPC Cream alone will not do the job on its own - but unlike our competitors we offer ALL the Professional Tools for the job, plus FREE diagnosis and FREE Project Mentoring with our Experts.

2. Most dampness problems are NOT simple Rising Damp. Why waste money on products that you don't need? Ask our advice for FREE or buy our Diagnosis Book, written by top Expert, Graham Coleman.

3. Some Competitors don't offer the simple Tools to do the job properly - Extension Tube, Drilling Template, DPC Plugs, Calibrated Skeleton Gun.

4. Some Competitors don't offer the Building Society/Lender Paperwork Pack - when you come to sell your Property you will need this paperwork.


Choose how you want to Buy Ultracure Cream 3000cc - 3 litres.

A. Buy One or More Tubs of Ultracure - with no accessories - 3000c

Enough for 27 metres (89 feet) of 4.5 inch single thickness wall - £68.87 plus VAT -


B. Buy One Tub of Ultracure - including the basic Accessories Pack - 3000cc

Enough for 27 metres (89 feet) of 4.5 inch single thickness wall - £73.96 plus VAT -

(includes Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy)


C. Buy One Tub of Ultracure + Pump Up Pot - including the basic Accessories Pack - 3000cc -

Enough for 27 metres (89 feet) of 4.5 inch single thickness wall - £108.64 plus VAT -

(includes Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy)


D. Buy 4 Tubs of Ultracure - including the basic Accessories Pack and a free pump - 3000cc.

Enough for 108 metres (356 feet) of 4.5 inch single thickness wall - £275.48 plus VAT -

(includes Pump with Extension Injection Tube for up to 9 inch walls, Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy).


Buy Professional Accessories separately:

1. Basic Accessories Pack - Professional Drilling Template, Product Guarantee Certificate (generic), BBA Certificate (photocopy) - £3.95 plus VAT -

2. Professional Drilling Template - £3.25 plus VAT -

3. Pump up Pot 5 litre - with injection tube for up to 9 inch thick walls - £39.77 plus VAT -

4. Nozzle extension kit for Pump up Pot, with coupler - 300mm extra - £15.99 plus VAT -

5. Masonry Drill Bit - 12mm x 310mm - (you can request extra length) - £11.98 plus VAT -

6. Puffer pump to blow out holes - small hand pump with extension tube - £4.99 plus VAT -

7. Special Injection Hole Plugs - 13mm tapered - 3 colours - bags of 25 - £3.96 plus VAT

Bag of 25, Dark Brown -

Bag of 25 Plugs, Limestone Buff -

Bag of 25 Plugs, Brick Red -

8. Property Specific 20 Year Product Guarantee Certificate - £20.00 plus VAT per job -

9. Building Society/Lender Paperwork Pack - Supplied in a labelled envelope for storage with your house Files/Deeds - Extra Copy Invoice, 20 Year Product Guarantee Certificate (for an individual property), BBA Certificate (Colour Copy) - £29.98 plus VAT -

10. Dampness in Buildings - Coleman - a reprint, to guide you in diagnosing dampness:

Printed Version - £9.99 plus VAT -

or, buy the Download Version - £5.99 plus VAT -

Ultracure 3000cc Bucket of PRS Cream

shown with Pump Up Pot & Injector

One Shot Injection of Cream Damp Proofing Cream

UltraCure Cream in a plastic bag, in a pot, for easy transfer to the pump. Note - it can sound solid in the pot, when shaken, due to the inner plastic bag rattling against the pot walls.

Special Offer - free 5 litre Pump Up Pot with every 4 x 3 litre tubs of Professional DPC Cream.

 

BBA Certificate - why it matters.

The British Board of Agrement tests building products. It is a UK Government backed organisation, so tested products are Certificated as reliable and genuine.

 

Building Society/Lender Paperwork Pack

When you come to sell your house the Purchaser will want to know what damp proofing work you have carried out. Our unique Pack, in a labelled envelope, is ready for you to store ready for that day.

 

Extended Injection Tubing - why it matters.

Most suppliers do not offer a tube extension kit.

Without this extended version you cannot start the injection of cream from the very bottom of the hole. Unless you start from the hole base you will trap air in the cream and the Damp Proof Course will be incomplete.

 

Our Unique Professional Drilling Template

The easy way to correctly inject a Damp Proof Course with DPC Cream. This Copyright printed cardboard device shows you the hole spacing, hole depth and the height of the holes above the ground, plus the Injection Method Checklist and Replastering Checklist, all on one compact Template.

An essential guide to hole height and spacing, includes replastering check list.

 

Certificates - why they matter.

Anyone buying a house will want to know which product has been used and see its 20 year Guarantee Certificate. You can select the extra Certificate, which is printed on 'card' and is individual to your property.

 

 

Masonry Bits

A good quality, sharp bit is essential in order to drill a clean, 12mm diameter hole. Always blow or vacuum the dust out of the hole before injection. Make sure that your drilling machine chuck and bearings are in good condition, otherwise you will produce a ragged, oval hole and the DPC Plugs will be a sloppy fit.

 

DPC Hole Plastic Plugs

It is important to fill the holes, either with these plastic plugs, or with sand and cement mix incorporating our Renderproof Additive. If outside holes are left open rainwater main enter. If inside holes are left open the cream may migrate into the render or plaster, if it has not be cut back exactly above the injection holes. This will waterproof the plaster or render, making it hard to paint and leaving a visible mark.

 

Dampness in Buildings - book

A superb condensed guide which helps you to identify and diagnose all the different types of dampness and their symptoms. Worth its weight in gold - handy, pocket sized. Buy a reprint or Download a copy to your computer. This book could save you a fortune in treatments that you don't need.

 

 

QUESTIONS ? - RING 01626 331351

Injection Tube on 5 litre Pump up Pot

 

 
   
    


 
  Pump Up Pot - 5 Litre SPECIAL TRADE Professional  
    
 Pump up pot for the 3 litre DPC PRS Cream - comes complete with aluminium injection rod and tap 
 

Method of use - unscrew the pump top, pour in the PRS Cream from the plastic bag, screw the top back on, hand pump to pressurise. Insert the injection rod into the hole to the bottom, open the tap and slowly withdraw.

Injection hand pump-up pot - when purchased with a 3000cc bucket of DPC Cream - £109.62 -

Injection hand pump-up pot - when purchased without any DPC Cream - £39.77 plus VAT -

Nozzle extension kit for Pump up Pot, with coupler - aluminium 300mm extra - £15.99 plus VAT -

Special Offer - free 5 litre Pump Up Pot with every 4 x 3 litre tubs of Professional DPC Cream - see section above.

 
  
5 litre Pump Up Pot for PRS
 
 

Buy Pump up Pot with 1 x 3 litre cream -

Buy Pump up DPC Injection Pot - (when purchased alone, with no DPC Cream) -

Buy Pump up Pot Nozzle Extension Kit -

Buy Professional Drilling Template -

 

Also, use our Professional Drilling Template

Useful training aid for staff, includes replastering check list.

 

 
 Plastic Plugs for DPC Injection Holes - tapered 10mm to 13mm  
    
 Available in dark brown, brick red and limestone buff (London Brick), packet of 25. Choose your colour below. Push or bang in to holes from 10mm up to 12mm in diameter.
Plugs for damp proofing holes - tapered 10mm to 12mm diameter plastic
 
  
Plastic Plugs for DPC Holes
 
 Brown or Cream/Limestone/Buff or Brick Red £3.96 plus VAT
Colours - BROWN, CREAM/LIMESTONE/BUFF, RED BRICK
 
 

 

Pack of 25, BROWN -

Pack of 25, CREAM/LIMESTONE/BUFF -

Pack of 25, BRICK RED -

DPC Hole Plastic Plugs

It is important to fill the holes, either with these plastic plugs, or with sand and cement mix incorporating our Renderproof Additive. If outside holes are left open rainwater main enter. If inside holes are left open the cream may migrate into the render or plaster, if it has not be cut back exactly above the injection holes. This will waterproof the plaster or render, making it hard to paint and leaving a visible mark.

 

 
 
SDS+ Masonry Bit - 12mm diameter x 310mm overall length
  
 

SDS+ Fitting, Masonry Bit for drilling 12mm diameter holes for PRS Injection

Also available - longer sizes, for thick walls - ring 01626 331351

Drilling Damp proofing Holes - Drill Bits
 
 Top Quality Masonry Bit - £11.23 plus VAT
12mm Diameter Masonry Bit
 
 

Buy 1 x 12mm x 310mm Masonry Bit -

Buy Professional Drilling Template -

 

Masonry Bits

A good quality, sharp bit is essential in order to drill a clean, 12mm diameter hole. Always blow or vacuum the dust out of the hole before injection. Make sure that your drilling machine chuck and bearings are in good condition, otherwise you will produce a ragged, oval hole and the DPC Plugs will be a sloppy fit.

You can drill either the mortar joints or the brick, or stone, depending on the relative hardness of each. For example:

* soft, loose mortar - drill the brick or stone if porous

* beautiful exterior brick or stone faces - drill the joints

 

 

 

 
 Replastering Additive - Renderproof Concentrate - 2.5 and 5 litre  
 

 

Have you considered the advantages of using our special damp proofing Mesh Membrane on the wall, instead of the more traditional approach of applying two coats of sand and cement Render, plus a finish coat of Plaster 'skim'.? Click here to see this option.

If you are going to replaster old walls you need to use this additive with your sand and cement base coats - DO NOT USE MODERN GYPSUM PLASTERS DIRECTLY ONTO OLD WALLS - e.g. bonding, browning, skim. Do not apply Unibond or similar adhesives to the walls. Do not add plaster or washing up liquid to sand and cement mixes. All these common 'trade' practices will cause future failure of your new decorations.

Renderproof waterproofs, plasticises and salt inhibits sand and cement renders. It is to be used for replastering with render, after the insertion of a chemical damp proof course. Concentrate to be mixed 40:1 with water in a sand and cement mix at 3:1 by volume, using dry, washed plastering or concreting sand.

Usage rate - allow 1 litre of concentrate per 4 square metres of render at 25mm (1 inch) thickness.

Frequently purchased with this product - Ultra Proof Water Repellent, Replastering Paint.

Replastering & Finishing Kit - includes Replastering Additive for the render backing coats (2.5 litres), Boron Gel (500cc) for treating the back of skirting boards, Replastering Paint (3 litre) which breathes and Anti-Mold Additive (2 x 50cc) to prevent mould growth in your new paint.

Replastering & Finishing Kit - £61.02 plus VAT - discounted product pack

Wall Paper Paste Additive - £10.85 plus VAT

Prevents Mold Growth in the paper - 50cc treats 2.5 litres of paste.

 

Renderproof Concentrate - holds back 'salts'

Replastering Additive - for sand and cement renders

Wallpaper Paste Additive - stops Mold growth

Wallpaper Anti Mould additive

Wallpaper Paste Concentrates - treat 2.5 litres each

 

 
 Renderproof Concentrate 40:1 - 2.5 litre - (10 sq.m) - £15.97 - 5 litre - (20 sq.m.) - £25.87 plus VAT.  
 

 

Buy Concentrated Renderproof 2.5 litre -

Buy Concentrated Renderproof 5 litre -

 

Buy Replastering & Finishing Kit - - used after injection of a Cream DPC.

Buy Wallpaper Paste Additive - - prevents Black Mold

 

 

Why Replaster?

Without a barrier coat of sand and cement (or you could use our Membrane) the damp and 'salts' left in the wall from rising damp will come through the plaster and ruin the decorations.Microporous Replastering paint

 

 
 Replastering Paint - 2.5 litre - breathing paint - microporous  
    
 

For use after replastering, either with sand and cement backing coats or normal, lightweight Gypsum plasters. This paint is special - it breathes - allow water vapour to pass through. The walls dry out properly and the paint does not bubble or lift off, as a regular vinyl paint might. Supplied in a plastic bag within a 5 litre tub, for protection in transit.

Usage rate - about 3 - 4 square metres per litre. One 3 litre pot should cover about 10 square metres.

Frequently purchased with this product - Ultra Proof Water Repellent, Stain and Damp Seal Paint.

Instant Damp Seal Spray - if your plaster is in generally good condition, but you have some damp spots that come and go, you can spray over with this unique paint. It dries almost immediately, forming the perfect base for our Stain and Damp Primer Paint. Cover with our Stain and Damp Primer Paint, applied by brush.

Usage rate - about 2 square metres per spray can.

Instant Damp Seal Spray - £13.20 - 380cc, plus VAT.

 

Damp Spot Seal Spray
 
 Replastering Paint - £15.88 - 2.5 litres, plus VAT
Instant Damp Seal
 
 

 

Buy Replastering Paint, 2.5 litres - - breathes, to allow new plaster to dry

 

Buy Instant Damp Stop Spray, 380cc - - seals damp and 'salty' patches

 

Buy Stain and Damp Primer Paint, 1 litre - - prevents stains from 'grinning' through emulsion.

 

Why use Replastering Paint?

Because most modern vinyl paints don't 'breathe' enough. This means that they won't let the wall dry out properly.

The trapped moisture behind the paint eventually pushes it up into bubbles and flakes. You may feel crunchy 'salt' behind the paint or see fluffy, white 'salts'.

Then you will need to remove the paint and use our Salt Neutraliser.

 

 

 
 Stain and Damp Seal Paint - a special Primer/Sealer - 1 litre  
 Instant Damp and Stain Seal Spray - base coat, ready for Primer - 380cc  
 

A special white universal surface primer designed to seal areas of plaster or render that have been stained by 'salts', damp or water leaks. This fast drying primer is the ideal base for emulsions and gloss paints and prevents unsightly stains from 'grinning' through paint finishes.

Usage rate - allow about 8 - 10 square metres per litre, per coat. Use two coats.

Instant Damp Seal Spray - if your plaster is in generally good condition, but you have some damp spots that come and go, you can spray over with this unique paint. It dries almost immediately, forming the perfect base for our Stain and Damp Primer Paint. Cover with our Stain and Damp Primer Paint, applied by brush.

Usage rate - about 2 square metres per spray can.

Spray Dam SealBrushing Damp Sealer and primer
 
 Stain and Damp Seal Primer Paint - £29.80 - 1 litres, plus VAT
Stain and Damp Seal Paint - 380cc Spray or 1 litre Brushing
 
 Instant Damp Seal Spray - £13.20 - 380cc, plus VAT.
Stops water marks, stains and damp patches from 'grinning' through your paint.
 

 

Buy Stain and Damp Primer, 1 litre - - prevents stains from 'grinning' through emulsion.

Buy Instant Damp Stop Spray, 380cc - - seals damp and 'salty' patches, then Prime over.

 

BLACK MOLD?
See our MOLD SHOP

 
 Salt Neutraliser - 1.0 and 5 litre  
    
 Kills 'salts' in walls. Can be used on bare masonry, bare render or bare plaster - will not penetrate paint. Usage rate - apply with a brush at a rate of 5 - 10 square metres per litre, depending on the roughness of the surface, twice. Damp the wall with fresh water before each coat.
Neutralise 'salts' on masonry
 
 Salt Neutraliser - 1 litre - £16.70 - 5 litre - £49.97 plus VAT
Salt Neutraliser, 5 litre and 1 litre
 
 

 

Buy Salt Neutraliser 1 litre -

Buy Salt Neutraliser 5 litre -

 

Why Neutralise?

All kinds of 'salts' emerge from brickwork, stonework, plaster and render as a result of dampness passing through the building. Some are brought up from under the ground. If they reach the surface of your plaster they ruin the decorations.

 


 

Ultra Proof - 5 and 25 litres - liquid, breathing water repellent - 5+ year life

 

  
 

Dryseal Cream- 3 litres - cream, breathing water repellent - 5+ year life

 

  
 Enviroseal Plus - 5 litres - cream, super upgraded breathing water repellent cream - 15+ year life   
 

 

Ultra Proof - 5 litres & 25 litres

Water based, acrylic layer forming water repellent for wall and floor treatment. Repels water on outside walls, prevents dusting on concrete floors, primes and seals all types of plaster, render, brickwork and stonework. Can be over-painted or applied over paints, to lengthen life and reduce dirt build up. No solvents, no smell. Can be applied to a damp wall.

Usage rate - allow up to 4 square metres per litre, by brush or low pressure, coarse spray.

Frequently purchased with this product - 12 litre Knapsack Sprayer with spray lance, suitable for sprayer all water based fluid products, as well as your garden.

Dryseal Cream - 3 litres

A powerful cream containing Silane. As opposed to conventional liquid products, DRYSEAL can be applied in just one working operation to achieve the desired loadings for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient penetrates the substrate within a short time (30 minutes to several hours) where it reacts to become a polymer silicone resin.

The initial white layer disappears completely and, since the effective ingredient is the same as in conventional liquid water repellents, substrates treated with DRYSEAL remain permeable to water vapour (allow the structure to ‘breathe’).

Usage rate - allow up to 4 to 5 square metres per litre, by brush, up to 15 square metres per tub.

Enviroseal Plus - 5 litres

Super long lasting, mega penetrating new cream Repellent Technology. Enviroseal Plus has been formulated to penetrate as deeply as possible into porous masonry substrates and this provides optimal protection against the absorption of water and pollutants as well as frost/salt damage. The initial white layer disappears completely and, since the effective ingredient is the same as in conventional liquid water repellents, substrates treated with Enviroseal Plus remain permeable to water vapour (allow the structure to ‘breathe’).

Usage rate - allow up to 4 to 5 square metres per litre, by brush, up to 25 square metres per tub.

 

Water Repellent on brickwork

Right Side of brick surface - One coat of Ultra Proof Repellent

prevents the water from penetrating

 

Knapsack Sprayer

Knapsack Sprayer

 

 
 Ultra Proof - 5 litre - £49.50 - Ultra Proof - 25 litre - £181.50 - Dryseal - 3 litres - £68.96 - Enviroseal Plus - 5 litres - £135.60 plus VAT.

 

 
    
 Knapsack Sprayer 12 litre - £42.86 - Heavy Duty Knapsack Sprayer 12 litre - £59.86, all plus VAT
Enviroseal Plus - 15 years + of wall protection
 
 

 

Buy Ultra Proof Liquid Repellent - 5 litre -

Buy Ultra Proof Liquid Repellent - 25 litre -

Buy Dryseal Cream Repellent - 3 litre -

Buy Enviroseal Plus Cream Repellent - 5 Litre -

Buy Knapsack Sprayer - 12 litre -

Buy Heavy Duty Knapsack Sprayer - 12 litre -

15 Year Water RepellentMembrane Plugs and Seals
 

 
 Wall Mesh Membrane Kit - replaces sand and cement render after the insertion of a Damp Proof Course - * special 1 metre roll cut to size  
 

Special dimpled plastic sheet, with a welded on polypropylene mesh, which provides an insulating air gap. For fixing to damp or salty walls onto bare masonry or bare render, but not over Gypsum based Plaster. The Mesh surface can be either directly plastered with Carlite Bonding Plaster or covered with Plasterboard fixed with 'dabs' of adhesive. The Kits contain either a 1 metre or 2 metre wide roll of Mesh Membrane to the length that you specify, white fixing plugs, seal rope for the plugs, and double sided joint tape.

*The 1 metre wide roll is ideal for covering the bottom 1 metre of a wall that has been damp proofed. This material has a special very low dimple height, to keep the overall thickness as small as possible. This allows it to be plastered or plaster boarded and still marry up smoothly with the original plaster at the joint line.

Mesh Membrane - for lining damp walls
 
 

 

Why we are so different to our competitors? Because we sell part rolls!

We assemble your chosen lengths of Membrane, quantities of plugs and seals, tape and mastic, to provide you with exactly the Kit you need for your Project - no need to waste money on complete rolls or full boxes - just give us the wall and floor dimensions and we will give you the most competitive price for your exact needs,

and we price match! We are never knowingly beaten on price or helpfulness.

To see our full range of Membrane Products visit our Membrane Shop

Call David now for real help on 01626 331351. He can give you an accurate costing for your project.

 

Mesh Membrane with fixing plug

For more details go to www.drywallandfloor.co.uk

New - Slimline Mesh Membrane for walls and Slimline Flooring Membrane for floors - only 3mm thick.

Ideal for walls having only the lower 1 metre replastered after the insertion of a damp proof course, or on floors, for laying under sensitive new timber flooring, where moisture in the floor slab may cause swelling and lifting.

For the full range click to - VISIT THE MEMBRANE SHOP

 
Liquid Membranes - waterproof brush on coating, indoors & outdoors  
 

Brush on Liquid Membranes - for sealing floors and walls

Technoseal Rubber Based Paint - use outdoors or indoors - one pack

Ultra strong damp proofing rubber membrane, applied by brush, available in black and white. Perfect for sealing walls partly below ground, external walls below the DPC and to seal damp concrete floors. Can be used under plaster or a screed to provide a damp proofing layer.

Coverage Rate - up to 4 square metres per kilo on smooth surfaces.

Technoseal Black or White - £30.46 per 5 kgs, £60.92 per 10kgs, plus VAT.

Buy Technoseal Black - 5kgs -

Buy Technoseal Black - 10kgs -

Buy Technoseal White - 5kgs -

Buy Technoseal White - 10kgs -


Ultra Epoxy Seal Coating - Epoxy Based - use indoors only - two pack

Ultra Epoxy Seal coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 2.5 square metres per litre on smooth surfaces.

Colours - Red = RAL3013, Grey = RAL7042.

Ultra Epoxy Seal coating - Clear - £27.88 per 1 litre, £48.92 per 2.5 litres, £83.85 per 5 litres plus VAT.

Ultra Epoxy Seal coating - Red or Grey - £29.89 per 1 litre, £52.88 per 2.5 litres, £91.99 per 5 litres plus VAT.

Buy Epoxy Seal Coating Clear - 5 litre -

2.5 litre -

1 litre -

Buy Epoxy Seal Coating Red - 5 litre -

2.5 litre -

Buy Epoxy Seal Coating Grey - 5 litre -

2.5 litre -

1 litre -


UV Resist Clear Coating - Polyurethane Based - use indoors and outdoors - one pack

Ultra UV Resist coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 5 square metres per litre on a smooth surface

Ultra UV Resist Clear coating - Clear - £18.65 per 1 litre, £46.88 per 2.5 litres plus VAT.

Buy UV Resist Clear coating - 1 litre -

Buy UV Resist Clear coating - 2.5 litre -

 

 

 

 

Rubber Based Waterproofing Paint

Ultra Dense Brush On Liquid Membrane

 

 

Brush on Epoxy Seal Coat

Ultra Epoxy Seal coating - brush or roller application.

 

Ultra Epoxy Seal Coat - two pack

 

 

UV Light Resistant One Pack Sealer

 

UV Resist Clear Coating 1 litre

 

 


 
 Damp Meter - pin type and DIY Masterclass Dampness Book  
 

 

Professional Damp Meter with Timber and Masonry digital scales, battery and calibration test facilities.

Tip - ask for our FREE guide Data Sheet which describes how to use Damp Meters and explains the meaning of common patterns of readings. Ring Angela or David for Free Help on 01626 331351.

For more Meters Click Here.

Quick DIY Master Class in Dampness and Condensation - become your own Expert in 1 hour! Buy our "Dampness in Buildings" reprinted book by the great expert Graham Coleman. A great read, short and to the point.

 

Damp Meter measuring wood moisture content
 
 Professional Calibrated Damp Meter - £49.56 - Dampness and Condensation Masterclass Book - £9.99 by Post, or Download to your computer for £5.99, plus VAT.
Damp Meter testing wood
 
 

Buy Professional Grade Damp Meter -

Buy Masterclass Book Reprint - by Post, or with other purchases -

Buy Masterclass Book as a Download to your computer - Download only -

 

Why use a Damp Meter?

Electrical Conductivity Meters, with pins, allow you to take surface and below surface readings in plaster, wood and masonry. The pattern and level of the reading will tell you if you have a problem and what type of dampness you are looking at. You can always call us to help you interrupt your readings.

 


 
 Home Condensation Monitor - measures air temperature and moisture content and DIY Masterclass Dampness Book  
 

Handy Hygrometer for measuring Relative Humidity and Air Temperature. This allows you to prevent Mould growth by either regulating the heating and ventilation, or by adjusting your Dehumidifier. A vital tool for assessing the risk of Condensation.

Quick DIY Master Class in Dampness and Condensation - become your own Expert in 1 hour! Buy our "Dampness in Buildings" reprinted book by the great expert Graham Coleman. A great read, short and to the point.

 

Humidity Tester - hygrometer for home use
 
 

Standard Readout - £23.40 Jumbo Readout - £24.20 plus VAT

Dampness and Condensation Masterclass Book - £9.99 by Post, or Download to your computer for £5.99 plus VAT.

Jumbo Readout Hygrometer - big number display
 
 

 

Buy Home Condensation Monitor, Standard Readout -

Buy Home Condensation Monitor, Jumbo Readout -

Buy Masterclass Book Reprint - by Post, or with other purchases -

Buy Masterclass Book as a Download to your computer - Download only -

 



SPECIAL OFFER DIY KITS - INCLUDING DAMP PROOFING CREAM - discounted complete DIY damp proofing kits:

Small DIY Kit - 11.4 metres of single brick wall (3 x DPC Cream 380cc, 1 x Extended Nozzle, 1 x Skeleton Gun 400cc, 1 x Drill Bit 12mm x 310, 1 x Pair Gloves, 1 x Professional Drilling Template) - £69.97 plus VAT.

Medium DIY Kit - 22.8 metres of single brick wall ( 6 x DPC Cream 380cc, 2 x Extended Nozzle, 1 x Skeleton Gun 400cc, 2 x Drills Bit 12mm x 310, 1 x pair Gloves, 1 x Professional Drilling Template) - £120.61 plus VAT.

Large DIY Kit - 30.4 metres of single brick wall (8 x DPC Cream 380cc, 2 x Extended Nozzle, 1 x Skeleton Gun 400cc, 2 x Drills Bit 12mm x 310, 1 x pair Gloves, 1 x Professional Drilling Template) - £144.84 plus VAT.

Buy Small DIY Kit - - discounted product pack

Buy Medium DIY Kit - - discounted product pack

Buy Large DIY Kit - - discounted product pack


SPECIAL OFFER - DAMP PROOFING CREAM ONLY- discounted deal

Buy 380cc Cartridges in Boxes of 8 = 1 box of 8 Tubes for £96.90 plus VAT (£12.11 per litre cartridge) -

Buy 1000cc Cartridges in Boxes of 8 = 1 box of 8 Tubes for £166.60 plus VAT (£20.83 per litre cartridge) -

Buy 3000cc Tubs in Boxes of 8 = 8 Tubs for £468.32 plus VAT (£58.53 per 3 litre tub) -


Replastering & Finishing Kit

Includes Replastering Additive for the render backing coats (2.5 litres), Boron Gel (500cc) for treating the back of skirting boards, Replastering Paint (3 litre) which breathes and Anti-Mold Additive (2 x 50cc) to prevent mould growth in your new paint.

Replastering & Finishing Kit - £63.37 - discounted product pack -

 

  
We accept the following cards: Maestro, Visa, MasterCard
       

SECURE PROCESSING


   

Property Repair Systems, Unit 3, Olympus Business Park, Kingsteignton Road, Newton Abbot, Devon. TQ12 2SN

Tel: 01626 331351 Fax: 01626 331143 E Mail: help@propertyrepairsystems.co.uk


   

Home | Damp| Plastering | Membrane | Damp Meters | Anti-Mould Additives |Privacy Policy| Returns Policy | Contact


Damp Problems in the House - how to get rid of damp

Damp walls in houses are sometimes caused by Rising damp, but treating damp always requires careful analysis to avoid damp proofing walls that are suffering from penetrating dampness, condensation or residual 'salts'. We recommend damp proofing cream by hand injection of a new damp proof course (DPC).

If you ask for our free help we will ensure that you know how to treat damp walls properly to stop damp and if necessary how to use a Damp Meter. You can easily use PRS damproofing cream to install a damp proof course, sometimes referred to as a DPC, without any special training. In treating damp you may also need to consider some tanking, below the damp proof course, which means forming a waterproof coating to stop damp penetrating from below ground.

Other considerations- treating damp

Rising damp can be found in houses which have not been built with a damp proof course or where the damp proof course is faulty. The signs of rising damp can include a tidemark on walls just above the skirting boards, damp patches that come and go, 'salt' marks, loose paint or wallpaper and the plaster can be cold to the touch. To stop damp of this kind we need to either install a new DPC or uncover the original damp proof course level - it may have been bridged by raised garden soil, pathways or even by the local Council in surfacing the pavements.

Rising damp is not confined to external walls. You should also examine your internal and Party walls for the tell-tale signs. The problem of rising damp should be addressed as soon as possible. Lack of treatment will result in a deterioration of the masonry, plaster and any woodwork that is attached (for example, skirting boards). Another significant side-effect of damp, some authorities believe, is that the mould that it can cause is a major factor in childhood asthma. It can certainly trigger asthma attacks! Apply one of our Anti-Mould products - Anti-Mould Cleaner, Anti-Mould Paint or use our concentrated Anti-Mold Paint Additive (works in all types of paint).