BASIC KIT - No. 1.

Contents - 1 x Mould Killer Concentrate 250cc (makes 5 litres), 2 x Anti Mould Paint Additives 50cc (for 5 litres of any paint, in total)

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Then mix the Mold Killer Concentrate with water to make 5 litres of solution and wash down all affected surfaces with a sponge. Allow the chemical to dry without rinsing. Add one paint treatment concentrate to each 2.5 litres of paint (any paint type) and mix thoroughly.

Usage rate - Mold Killer Concentrate makes 5 litres, treats 40 square metres, Anti Mould Paint Additives each treat 2.5 litres of paint, 5 litres in total.

Frequently purchased with this product - Scrub Out Killer (for tile grout), Stain Seal and Damp Primer Paint (to cover black mould marks), Home Humidity Meter.

£31.38 - Ultra Mold Killer Basic Kit, No. 1, plus VAT

STANDARD KIT - No. 2.

Contents - 1 x Mould Killer Concentrate 250cc (makes 5 litres), 2 x Anti Mould Paint Additives 50cc (for 5 litres of any paint, in total), 1 x Stain Seal Paint 1 litre (Primer, covers up to 8 square metres).

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Mix the Mold Killer Concentrate with water to make 5 litres of solution and wash down all affected surfaces with a sponge. Allow the chemical to dry without rinsing. Apply one or two coats of Stain Seal Primer. Allow to dry between coats. Add one paint treatment concentrate to each 2.5 litres of your own paint (any paint type) and mix thoroughly. Usage rate - Mold Killer Concentrate makes 5 litres, treats 40 square metres, Stain Seal Primer paint covers up to 8 square metres per coat, Anti Mould Paint Additives each treat 2.5 litres of your chosen paint, 5 litres in total.

Frequently purchased with this product - Home Humidity Meter, Scrub Out Mould Killer (for tile grout)

£52.00 - Mould Removal & Stain Paint Kit, Standard, No.2, plus VAT - discounted Pack Deal

Buy Mould Removal & Stain Paint Kit, Standard, No.2. -

3. Ultra Mould Removal, Stain Seal Paint and Humidity Monitor Kit - as above, but also includes a Humidity Monitor with Memory - this kit price includes a 15% discount off individual prices.

PREMIUM KIT - No. 3.

Contents - 1 x Mould Killer Concentrate 250cc (makes 5 litres), 2 x Anti Mould Paint Additives 50cc (for 5 litres of any paint, in total), 1 x Stain Seal Paint 1 litre (Primer, covers up to 8 square metres), 1 x Humidity Monitor with Memory.

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Monitor the moisture content of the air in your house using our Memory Humidity Monitor - aim for 55% - 65%. Condensation will begin to form on the coldest surfaces in a room at 70%.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Mix the Mold Killer Concentrate with water to make 5 litres of solution and wash down all affected surfaces with a sponge. Allow the chemical to dry without rinsing. Apply one or two coats of Stain Seal Primer. Allow to dry between coats. Add one paint treatment concentrate to each 2.5 litres of your paint (any paint type) and mix thoroughly. Usage rate - Mould Killer Concentrate makes 5 litres, treats 40 square metres, Stain Seal Primer paint covers up to 8 square metres per coat, Anti Mould Paint Additives each treat 2.5 litres of your chosen paint, 5 litres in total.

Frequently purchased with this product - Scrub Out Mould Killer (for tile grout)

£71.89 - Mould Removal, Stain Seal & Humidity Monitor Kit, Premium, No. 3, plus VAT - discounted Pack Deal

Click for Help Page

5 Year Mold Guarantee on Your paint with our Additive

STANDARD KIT + TEST - KIT - No. 4.

Contents - 1 x Mould Killer Concentrate 250cc (makes 5 litres), 2 x Anti Mould Paint Additives 50cc (for 5 litres of any paint, in total), 1 x Stain Seal Paint 1 litre (Primer, covers up to 8 square metres), 1 x Condensation Test Strip.

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Test your walls for Condensation using the special Test Strip before and after treatments. Mix the Mold Killer Concentrate with water to make 5 litres of solution and wash down all affected surfaces with a sponge. Allow the chemical to dry without rinsing. Apply one or two coats of Stain Seal Primer. Allow to dry between coats. Add one paint treatment concentrate to each 2.5 litres of your paint (any paint type) and mix thoroughly. Usage rate - Mold Killer Concentrate makes 5 litres, treats 40 square metres, Stain Seal Primer Paint covers up to 8 square metres per coat, Anti Mould Paint Additives each treat 2.5 litres of your chosen paint, 5 litres in total.

Frequently purchased with this product - Anti Condensation Paint, Home Humidity Meter, additional Condensation Test Strips (also available in a box of 6 Test Strips)

£57.06 - Kit No. 4 - Standard Kit No. 2 + Condensation Test, plus VAT - discounted Pack Deal

£6.85 - Single Condensation Test Strip, plus VAT.

£34.60 - Box of 6 Condensation Test Strips, plus VAT.

.

Buy Kit No. 4 Standard Kit + Condensation Test Strip -

Buy Single Condensation Test Strip - Buy Box of 6 Condensation Test Strips -

SPRAY AND SCRUB KIT - No. 5.

Contents - 1 x Spray bottle of Mould Killer, 500cc (ready to use), 1 x Scrubber headed bottle, 250cc (ready to use), 1 x Mould Killer Concentrate, 250cc (makes 5 litres of Mould Killer for refilling Spray and Scrub bottles).

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Use the Sprayer bottle or Brush to apply the Mould Killer to all affected surfaces. Work the chemical into any grooves or crevices with the Brush headed bottle. Allow the chemical to dry without rinsing. Add one paint treatment concentrate to each 2.5 litres of paint (any paint type) and mix thoroughly.

Usage rate - Mold Killer Concentrate makes 5 litres, treats 40 square metres - use as a refill.

Frequently purchased with this product - Stain Seal and Damp Primer Paint (to cover black mould marks), Home Humidity Meter.

You can buy the individual packs as follows:

Ultra Mold Killer - 500cc - Spray bottle, for all surfaces

Ultra Mold Killer - 250cc - Scrubber bottle, for tile grout and crevices

Concentrated Mould Killer:

Ultra Mold Killer Refill - 250cc - concentrate, makes 5 litres of refill wash

Ultra Mold Killer Refill - 1 litre - concentrate, makes 20 litres of refill wash

Ultra Mold Killer Refill - 5 litre - concentrate, makes 100 litres of refill wash

£23.39 - Mould Spray and Scrub Kit, No. 5 - discounted Pack Deal

£8.98 - Mold Killer Scrub Out 250cc, plus VAT

£8.86 - Mold Killer Spray 500cc, plus VAT

£9.68 - Mold Killer Concentrate 250cc - refill, makes 5 litres

£34.60 - Mold Killer Concentrate 1 litre - refill, makes 20 litres

£98.60 - Mold Killer Concentrate 5 litres - refill, makes 100 litres

Buy Mould Spray and Scrub Kit, No. 5 -

Buy Mold Scrub Out 250cc -

Buy Mold Killer Spray 500cc -

Buy Mold Killer Refill - concentrate 250cc -

Buy Mold Killer Refill - concentrate 1 litre -

Buy Mold Killer Refill - concentrate 5 litres -

Ultra Anti Mould Paint Additive and Anti Mould Wallpaper Paste Additive - 50cc - treats 2.5 litres of paint or 2.5 litres of wallpaper paste

5 Year Mold Guarantee on your paint or wallpaper when treated with this additive. Treats all types and finishes of paint - emulsion, eggshell, silk, gloss etc.

Use after treatment with Anti Mold Killer.

High Strength professional quality paint additive - Guarantees your paint against Mold for 5 years.

Add one Ultra Concentrate to each 2.5 litre of any paint of your choice. Mix well. Usage rate - one additive per 2.5 litres of paint.

Frequently purchased with this product - Anti Mold Killer, Anti Mold Scrub Out.

Wallpaper Paste Additive - treats all types of wallpaper paste, prevents mold growth behind the paper. Use after treatment with Anti Mold Killer.

£10.85 - Anti Mould Paint Additive Concentrate 50cc, plus VAT

£10.85 - Wallpaper Paste Additive Concentrate, plus VAT

Buy Anti Mould Paint Additive 50cc -

Buy Wallpaper Paste Additive 50cc -

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Always wash down all affected surfaces with Anti Mold Killer using a sponge, before repainting. Allow the Killer to dry. Apply two coats of Anti Mold Emulsion Paint. You can add any make of Colour Tinta to this paint. Usage rate - each 2.5 litre tin should cover about 10 -12 square metres per coat, on a smooth surface.

Frequently purchased with this product - Scrub Out Mould Killer, Stain and Damp Primer Paint, Home Humidity Meter.

£29.95 - Anti Mold Paint, White only, plus VAT

For wall, floor, ceiling and outdoor surfaces prone to or affected by Mold, Slime, Verdegris and Rot. This unique formulation treats and prevents the growth of Molds and Rots, Slime and Moss.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free.

Usage rate - each 5 litre bottle should cover about 25 - 30 square metres per coat, on a smooth surface. Apply two coats. Outdoor Use - on Decks, Walls, Slabs, Patios, Driveways, Yacht Teak Decks etc. Apply in Autumn and again in Spring to prevents growths in concrete, render, stone and wood.

Frequently purchased with this product - Scrub Out Killer, Stain and Damp Primer Paint, Home Humidity Meter.

Special features - for use on Yacht Teak Decks

£16.90 Boracol 10RH, 1 litre, plus VAT

£69.98Boracol 10RH, 5 litres, plus VAT

Buy Boracol 10RH 1 litre -

The brushing version is fast drying and curing, and works well on most stains and damp patches.

The spraying version is ultra fast drying and curing, ideal for persistent patches, especially on chimney breasts

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

Always wash down all affected surfaces with Anti Mold Killer using a sponge, before repainting. Allow to dry. Apply one or two coats of Stain and Damp Primer Paint. Use our Anti Mold Paint Additive concentrates in the subsequent paint coats.

Usage rate - 1 litre Can Brushing Paint - should cover about 4 - 5 square metres per coat, on a smooth surface.

Usage rate - 400cc Can Spraying Paint - should cover about 1 - 2 square metres per coat, on a smooth surface.

Frequently purchased with this product - Scrub Mould Out Killer, Home Humidity Meter.

£29.80 Brushing Stain and Damp Primer, 1 litre, plus VAT

£13.20 Spraying Stain and Damp Primer, 400cc, plus VAT

Buy Brushing Stain and Damp Primer 1 litre -

Sits in the roof or loft space, above the insulation and gently pumps fresh air down into the building via a grille fitted into the hall ceiling. The fresh air dilutes the stale air in the house, reducing humidity and reducing or eliminating Condensation.

Energy Usage rate - typical average running costs are £0.01 (one pence) per day with the heater disabled.

Frequently purchased with this product - Home Humidity Meter.

£650.00 - Complete Ventilation System, plus VAT

Ceiling and Pipe Paint - for showers, bathrooms and kitchens. Prevents dripping water and mould growth.

Always kill the Mold first before painting, otherwise the residual mold spores can still germinate and then grow through even the best anti-mold paints.

Thoroughly clean all surfaces with a regular detergent or Sugar Soap, to remove grease, dirt and loose material. Rinse to remove all detergents and check that the surfaces are grease free. If the plaster is damaged or there are visible 'salts' call us for free Technical Advice on 01626 331351.

For use after cleaning with our Anti Mold Killer and Priming, if there are stains, with our Stain and Damp Seal Paint. This paint is special - it breathes and allows water vapour to be absorbed and to be given up again when the humidity is lower. Ideal for Ceilings in Shower Rooms, Bathrooms and Kitchens.

Usage rate - about 3 square metres per litre. One 2.5 litre pot should cover about 6 - 7 square metres.

Frequently purchased with this product - Scrub Out Killer, Stain and Damp Primer Paint, Home Humidity Meter.

£17.65 - Ceiling and Pipe Anti Mould and Anti Condensation Paint, 2.5 litres, White only, plus VAT

Flats, bedsits, care homes - ideal for single room mould control with minimum heat loss.

Installed through walls, this unit exchanges warm moist air in a room for fresh, drier air, but cleverly extracts the warmth from the outgoing air and uses it to warm the incoming fresh air. The fresh air dilutes the stale air in the house, reducing humidity and reducing or eliminating Condensation.

Energy Usage rate - uses less power than a 20 watt light bulb - recovers up to 73% of the heat in the outgoing air.

Frequently purchased with this product - Home Humidity Meter

£396.86 - Anti Mould Fan with Heat Recovery System, plus VAT

Kills 'salts' in walls. Can be used on bare masonry, bare render or bare plaster - will not penetrate paint.

Usage rate - apply with a brush at a rate of 5 - 10 square metres per litre, depending on the roughness of the surface, twice. Damp the wall with fresh water before each coat.

Frequently purchased with this product - Scrub Out Killer, Stain and Damp Primer Paint, Home Humidity Meter.

£14.70 - 1 litre £47.35 - 5 litre plus VAT

Buy Salt Neutraliser, 1 litre -

Buy Salt Neutraliser, 5 litre -

Trickle Vents are required to allow a small amount of air to move through double glazed window frames, wooden, aluminium or plastic. They reduce the risk of condensation by changing indoor, humid air for fresh, less humid air, without causing a draught.

Usage rate - allow 1 kit per window header and at least one per 2 metres of window run. Size - 40mm wide x 520mm long. Supplied with Stainless Steel or brass screws. Drill a series of 10mm diameter holes through the frame to cover the ventilation area behind the Vent, avoiding the glass frame and outer frame.

Frequently purchased with this product - Home Humidity Meter

Data Sheet - click here

£23.95 - Inner + outer Kit, White or Brass only, plus VAT

(You can advise us of your choice of White or Brass in the Delivery Instructions box in the Shopping Cart - you may also select a white outer vent with a brass inner vent, if you wish)

Ultra Anti Condensation Dehumidifiers - reduce heating bills, prevent mold growth

A complete Dehumidifier Package - Machine, Humidity Meter, Test Strips.

Most Dehumidifiers have never been used properly because a few simple extra products are needed to make efficient use of the machine. Our complete package helps you to answer these simple, but vital questions:

1. For each room in my house do I currently have a Condensation problem? (Remember that the appearance of Black Mould is no guide - the conditions that caused it may long since have ceased, but the black stains do not go away on their own). ANSWER - test with our Condensation Test Pack. Use one strip per room. They are self adhesive and should be left in place.

2. When the Dehumidifier switches itself on is the Humidity high enough to be at risk of condensation? ANSWER - use the Humidity Meter, in the room with the Dehumidifier and set the dial on the Dehumidifier so that it switches on at about 65%.

3. When the Dehumidifier switches itself off is the Humidity low enough to avoid condensation? ANSWER - use the Humidity Meter, in the room with the Dehumidifier and set the dial on the Dehumidifier so that it switches off at about 55%

If the Dehumidifier Dial Setting is not operating approximately within the range suggested then the machine will need adjustment by the Manufacturer..

Dehumidifiers create an artificial 'cold spot' in the room, using a refrigeration coil (just like a freezer) and a small fan draws the room air across the coil.

The energy savings are significant - scientific trials have shown heating savings that gradually increase as the walls, floors and furnishings become drier. The drier the room the less energy is required to keep it warm.

Dehumidifier Package for 3 to 4 bedroom homes

- maximum output 18 litres in 24 hours - £225.99 plus VAT (including a 5 Year Guarantee)

Click to Buy - - for up to 180 square metres of floor, or 360 cubic metres of air space.

Dehumidifier Package for 4 to 5 bedroom homes

- maximum output 21 litres in 24 hours - £245.99 plus VAT (including a 5 Year Guarantee)

Click to Buy - - for up to 210 square metres of floor, or 420 cubic metres of air space.

Ask about - Castor Kit, Bacterial Filters and Direct Drainage Options

Q. Why are these Dehumidifiers so different!

A. Because they use Smart Electronic Control to adjust the freezer unit and fan so that they use the minimum energy for the maximum water removal, at whatever temperature the room is heated to!

Up to 30% Lower Running Costs - compared with conventional Dehumidifiers.

To discuss our full range of energy saving machines ring David Moore on 01626 331351.

Damp Meter - Pin type and DIY Masterclass Dampness Book

Cold Spot Thermometer - infra red with Laser pointer - point and read

Professional Damp Meter with Timber and Masonry digital scales, battery and calibration test facilities.

Tip - ask for our FREE guide Data Sheet which describes how to use Damp Meters and explains the meaning of common patterns of readings. Ring Angela or David for Free Help on 01626 331351.

For more Meters Click Here.

Quick DIY Master Class in Dampness and Condensation - become your own Expert in 1 hour! Buy our "Dampness in Buildings" reprinted book by the great expert Graham Coleman. A great read, short and to the point.

Cold Spot Thermometer - an infra red instant surface temperature is read on the display and can be stored in the memory. The Laser Pointer can be selected to read exact positions, ideal for checking for cold spots on walls. Frequently used where penetrating dampness is suspected, to detect dirty walls ties and locate gaps in cavity wall insulation.

Professional Calibrated Damp Meter - £49.56 plus VAT Dampness and Condensation Masterclass Book - £9.99 by Post, or Download to your computer for £5.99.

Cold Spot Thermometer - £67.50 plus VAT.

Buy Damp Meter -

Buy Masterclass Book Reprint, by Post or with other purchases - Download -

Buy Cold Spot Thermometer -

Mold Control Humidity Meters - Hygrometers - measure indoor air temperature and moisture content.

Condensation Test Strips - turn blue for proof of condensation.

Mould and Damp DIY Masterclass Dampness Book - printed or Download.

Handy Humidity Meter for measuring Relative Humidity and Air Temperature. This allows you to prevent Mould growth by either regulating the heating and ventilation, or by adjusting your Dehumidifier. A vital tool for assessing the risk of Condensation. Aim to keep your rooms between 55% and 65% and mould and condensation will be eliminated (after a good clean).

Quick DIY Master Class in Dampness and Condensation - become your own Expert in 1 hour! Buy our "Dampness in Buildings" reprinted book by the great expert Graham Coleman. A great read, short and to the point.

£5.95 - Single Condensation Test Strip, plus VAT.

£34.60 - Box of 6 Condensation Test Strips, plus VAT.

Buy Home Condensation Meter, Standard Readout -

Buy Home Condensation Meter, Jumbo Readout -

Buy Single Condensation Test Strip -

Buy Box of 6 Condensation Test Strips -

Buy Masterclass Book Reprint, by Post or with other purchases - Download -

Condensation Test Strips prove that Condensation is occurring.