Quick Cream - new, easy to install, cream product - no pump required, no mess, no smell - includes injection nozzle extension

British Board of Agrèment - BBA Test Certificate No: 02/3961 - as used by the professionals. The BBA is a Government Approved organisation which has been testing building materials for over 30 years. Note - not all damp proofing materials have passed these tests - beware of cheap imitations).

click here for a check list if you want to diagnose your damp

A 'damp meter' and surface thermometer (see www.dampness-info.co.uk/meters.htm)are useful tools for this diagnosis - if not available use the back of your hand to assess the relative dampness of one affected area to another unaffected area..

click here to look at a real house Case Study

click here if you would like to read a genuine testimonial

400cc tube with extension nozzle - makes a maximum of 3.5 metres/11 feet of damp proof course in single thickness masonry (spacing interval 120mm/4.5 inch walls). Can be applied with a DIY, standard 400cc version mastic/sealant gun or a professional 400cc skeleton gun (see our Order Form)

1000cc tube with extension nozzle - makes a maximum of 9 metres/30 feet of damp proof course in single thickness masonry (spacing interval 120mm/4.5 inch walls). Requires a professional 1000cc skeleton gun (see our Order Form)

3 litre bulk pack, for professionals - makes a maximum of 27 metres/90 feet of damp proof course in single thickness masonry (spacing interval 120mm/4.5 inch walls). Requires a pump up dispenser.

Go straight to Price List and Order Form

* Optional Items:

- Replastering Additive (Rendaproof)

- 'Tanking' waterproofing liquid (BondAcryl)

- Certificate of Product Guarantee

- Salt Neutraliser

- Anti Mould paint

- Professional Skeleton Guns

- Professional Extension Tube (1000cc)

- Anti Dry Rot Paint

.

Replastering Notes: don't forget that replastering is essential if dampness has affected your plaster because of the 'salts' that come with the water: you have two options - either replaster to our specification using sand and cement, with Renderpruf salt inhibitor/waterproofer in the water or look at the Wall Membrane option. Wall Membranes offer a considerable improvement over sand and cement - they produce a warmer surface, can be insulated easily and can be directly plastered with lightweight, modern plasters, like Carlite Bonding.

For easy fix Membrane information go to: www.drywallandfloor.co.uk

First, check for high ground levels, leaking gutters and downpipes, water leaks. A Damp Proof Course must be at least 6 inches (150mm) above abutting ground level (whether internal or external), to avoid splash up or 'bridging'.

1. Drill 12mm diameter holes at 120mm intervals in the mortar course (or via the brickwork, angled down to meet the mortar course) selected to be at least 150mm above outside or abutting ground level. Blow or vacuum holes to remove dust.

2. Fit the extension nozzle to the cartridge tube and load into the skeleton gun

3. Inject cream from the bottom of the hole outwards until the hole is full.

4. Replaster to our specification.

Treat any skirting boards or joinery with Boron Ultra Gel.

Holes can be capped with mortar or fitted with a plastic plug

Replastering to a minimum of 1.2 metres internally, to our specification, using sand and cement and Rendapruf integral waterproofer, is required to finish the job and to prevent 'salts' damage to plaster finishes and decorations.

Our Products required: Quick Cream DPC, Skeleton Gun - either a 400cc or professional 1000cc

Optional Products: Rendapruf Replastering Additive (5 litre), Wall Plugs, Boron Ultra Gel (2.5 litre), UltraProof exterior wall treatment (5 litre or 25 litre), Anti-Mould Paint (2.5 litre), Professional Skeleton Guns (400cc or 1000cc), Professional Extension Nozzle (for repeated use with 1000cc cartridges)

Tools Required: 12mm masonry bit, electric hammer drill, eye protection

Go straight to Price List and Order Form

.

Typical usage rates:

4.5 inch thick (115mm) single leaf wall - 1000cc (1 litre) per 9 metres, inject from either side

9 inch thick wall (230mm) double leaf solid or cavity - 1000cc(1 litre) per 4.5 metres, inject from one side or from both sides.

18 inch thick wall (460mm) solid or random fill - 1000cc (1 litre) per 2 metres, inject from both sides