Easy to use plastic cartridge. Simply insert into a 10 inch (250mm) long skeleton gun and screw on the extension tube. Inject gently, like putting paste on your toothbrush, from the bottom of a 12mm diameter hole outwards. Usage rate - 3.5 metres (11 feet) per 400cc of 4.5 inch, single leaf wall.

Frequently purchased with this product - 400cc Professional Skeleton Gun, 12mm Masonry Bit, Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit.

£19.87 single tube, or £16.89 per tube in a box of 8 tubes, plus VAT, including FREE nozzle.

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

£14.50 400cc gun, £24.70 1000cc (1 litre) gun, plus VAT

400cc or 1000cc

For larger jobs - 1000cc plastic cartridge. Simply insert into a SPECIAL 1 Litre skeleton gun and screw on the extension tube. Inject gently, like putting paste on your toothbrush, from the bottom of a 12mm diameter hole outwards. Usage rate - 9.0 metres (30 feet) per 1000cc of 4.5 inch, single leaf wall.

Frequently purchased with this product - 1000cc SPECIAL 1 Litre Professional Skeleton Gun, 12mm Masonry Bit, Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit.

£29.87 single tube, or £25.39 per tube in a box of 8, plus VAT, including FREE nozzle.

Ring for our special low cost Skeleton Gun offer, when you buy this product.

Click for Help Page

For coating masonry, brick, stone, floors and walls. Simply mix with water to form a 'slurry' - a smooth, brushable thick paint, like masonry paint. Wet the surfaces first and allow to dry until just damp. Brush on one coat, with horizontal brush strokes and allow to dry. Re-damp before re-coating, if dried right out. Apply a second coat, brushing vertically. This eliminates the risk of missed patches and pinholes. Slurry can be rendered over whilst wet, or prime with another coat, or use BondaAcryl. Usage rate - 6 - 8 square metres per 25kgs, subject to surface roughness..

Frequently purchased with this product - BondAcryl as a primer, Renderproof Render Additive, Wall Membrane Kit.

£49.86 per 25kg plastic pail, plus VAT

.

UltraCure Injection Cream - 3000cc - BBA Certificate No:02/3961

Bulk container. Simply pour from the plastic bag into the special pump up injection pot. Inject gently, like putting paste on your toothbrush, from the bottom of a 12mm diameter hole outwards. Usage rate - 27 metres (89 feet) per 3000cc of 4.5 inch, single leaf wall.

Frequently purchased with this product - 5 litre Professional Pump Up Pot (illustrated), 12mm Masonry Bit, Renderproof Concentrate Render Additive, Ultra Proof Water Repellent, Wall Membrane Kit.

£79.87 plus VAT - ring for our special low cost pump offer when you buy this product.

Special Offer - free 5 litre Pump Up Pot with every 4 x 3 litre tubs of UltraCure Cream DPC

£271.56 plus VAT

SDS+ Fitting, Masonry Bit for drilling 12mm diameter holes for UltraCure Injection

Also available - longer sizes, for thick walls - ring 01626 331351 - Angela or Andy

Waterproofs, plasticises and salt inhibits sand and cement renders. To be used for replastering with render, after the insertion of a chemical damp proof course. Concentrate to be mixed 40:1 with water in a sand and cement mix at 3:1 by volume, using dry, washed plastering or concreting sand. Usage rate - allow 1 litre of concentrate per 4 square metres of render at 25mm (1 inch) thickness.

Frequently purchased with this product - Ultra Proof Water Repellent, Replastering Paint.

For use after replastering, either with sand and cement backing coats or normal, lightweight Gypsum plasters. This paint is special - it breathes - allow water vapour to pass through. The walls dry out properly and the paint does not bubble or lift off, as a regular vinyl paint might. Supplied in a plastic bag within a 5 litre tub, for protection in transit. Usage rate - about 3 - 4 square metres per litre. One 3 litre pot should cover about 10 - 12 square metres.

Frequently purchased with this product - Ultra Proof Water Repellent, Stain and Damp Seal Paint.

Water based, acrylic layer forming water repellent for wall and floor treatment. Repels water on outside walls, prevents dusting on concrete floors, primes and seals all types of plaster, render, brickwork and stonework. Can be over-painted or applied over paints, to lengthen life and reduce dirt build up. No solvents, no smell. Can be applied to a damp wall. Usage rate - allow up to 4 square metres per litre, by brush or low pressure, coarse spray.

Frequently purchased with this product - 12 litre Knapsack Sprayer with spray lance, suitable for sprayer all water based fluid products, as well as your garden

Why we are different!

We assemble your chosen lengths of Membrane, quantities of plugs and seals, tape and mastic, to provide you with exactly the Kit you need for your Project - no need to waste money on complete rolls or full boxes - just give us the wall and floor dimensions and we will give you the most competitive price for your exact needs.

To see our full range of Membrane Products visit our Membrane Shop

Professional Damp Meter with Timber and Masonry digital scales, battery and calibration test facilities.

Tip - ask for our FREE guide Data Sheet which describes how to use Damp Meters and explains the meaning of common patterns of readings. Ring Angela or Andy for Free Help on 01626 331351.

For more Meters Click Here.